Sie befinden sich gerade im folgenden Pfad:
PLC programming tool
Seiteninhalt
CoDeSys - All in one PLC programming tool
|
|
|
- Reach your targets sooner
Create the PLC program with visualisation
and I/O connection using a single tool.
A single project file simplifies creation of the project and, of course, subsequent maintenance.
|
- IEC6131-3 control programm
In compliance with the requirements the IEC programming languages can be selected to match every single module.
The IEC61131-3 programming languages, FUP, KOP, ST, AWL and AS are available.
- Debugging
- In online operation CoDeSys provides important monitoring and debugging functions, such as Breakpoint, Single Step, Single, Cycle etc.
The PLC program can be tested prior to commissioning by means of the simulation mode.
|
|
Visualisation
- Direct access to the PLC program
The visualisation for the DC1000 integrated in CoDeSys is a special highlight.
As with the prefabricated visualisation elements, such as trend graphs, alarm tables or pointer instruments, the visualisation accesses the variables of the PLC program directly.
|
- Create once and use on three platforms
|
 |
|
 |
|
 |
| |
|
|
|
|
Target visualisation
On the DC1000 for operating the machine or plant.
|
|
Web visualisation
In the Internet browser in the form of web visualisation for monitoring and remote maintenance.
|
|
Debugging visualisation
On the developer notebook for observing and testing the application.
|
|
|
Industrial Ethernet
Integrated Ethernet communication for new applications
The special "communication highlight" is the many protocols available for the Ethernet interface:
- Profinet Device - Fast, simple connection to plant controls of, for example: Siemens, Phoenix Contact,....
- EtherCAT - State-of-the-art device technology relies on the EtherCAT interface. With the Berghof CoDeSys PLC controllers you can use them immediately.
- Bacnet - Enables the universal CoDeSys PLC controllers to exchange data with professional central building control systems.
All protocols mentioned here can be integrated easily into the Berghof CoDeSys PLC controllers by way of software or as a CoDeSys Library.
|
|
Libraries
Pack your know-how into libraries, which you can use again in each new project.
Machine and plant know-how can be summarised to form libraries in their own right and can be used again for each new project. |
|
Control system configuration
|
|
|
|
- Integrate field bus components
With the appropriate configuration file and the association communications parameters Profibus and CANopen components can be integrated into CoDeSys quickly.
E-bus modules can be used immediately thanks to the Target Support Package from Berghof. The I/O data can be observed in online mode.
|
page up