Suche

Sie befinden sich gerade im folgenden Pfad:
CANopen I/O modules

Seiteninhalt

The complete selection of the CANopen range of products

S_CANopen_270px
Vergrößern

Connect CANopen modules, such as I/Os, drive controllers etc. to the Berghof SPS and display controls fast and conveniently.

All CAN interfaces of the controllers have a CANopen Master function

 

 

 

WAGO I/O system supplements the Berghof portfolio

S_Wago_K_240px

Lupe_Symb

In projects demanding a great variance in the I/O interface connections, the cooperation with WAGO has proved worthwhile. We can supply you with WAGO I/O components together with the Berghof SPS and the display controllers. Thus you obtain a complete control solution from a single source.

 


Digital I/O

RDIO 16/16-0,5

S_RDIO_16_16_05_121px

Digital I/O module with CAN bus interface (locally expandable with QDIO16/16)

 
 Vergrößern  

 

Technical datas
CAN interface 1 (CANopen)
Serial interface 1
Digital input

16
Digital output

16 / 0.5 A (can also serve as inputs)

 

Downloads
Product information RDIO 16/16-0,5 PDF, german (185 kB)
Product information RDIO 16/16-0,5 PDF, english (178 kB)
Handbook RDIO 16/16-0,5 PDF, german (1,488 kB)
Handbook RDIO 16/16-0,5 PDF, english (1,484 kB)

 

 [Page up]   [Digital I/O]   [Remote I/O, digital]   [CAN adapter]


Remote I/O-module, digital

RDIO 8/24-0,5

S_RDIO_8_24_05_121px

Digital I/O module with CAN bus interface. Additional, zero-potential input is used for phase synchronization if the digital outputs are to be synchronously switched to an external alternating voltage.

 
 Vergrößern  

 

Technical datas
CAN interface

1 (CANopen)
Serial interface

1
Digital inputs

8
Digital Outputs

24 / 0,5 A
Zero-potential input 1

 

Downloads
Product information RDIO 8/24-0,5 PDF, german (179 kB)
Product information RDIO 8/24-0,5 PDF, english (172 kB)
Handbook RDIO 8/24-0,5 PDF, german (1,121 kB)
Handbook RDIO 8/24-0,5 PDF, english (1,056 kB)

 

[Page up]   [Digital I/O]   [Remote I/O, digital]   [CAN adapter] 


E-Bus / CAN adapter

QCAN-E/QCAN

S_QCANE_51px

The module is used for the remote connection of Q and R modules with a cable line via CAN bus or e-bus.

In the case of an e-Bus connection, the cable can be up to 3 meters long

 

 Vergrößern

  

 

Technical datas
Interface

E-Bus connection,
Cable length: up to 3 m

CAN bus connection,
CAN channel 1 on
Sub-D plug-in connector

 

Downloads
Product information QCAN/QCAN-E PDF, german (310 kB)
Product information QCAN/QCAN-E PDF, english (303 kB)
The module is described in the  CANtrol introduction handbook (7,180 kB), german
The module is described in the  CANtrol introduction handbook (7,460 kB), english

 

[Page up]   [Digital I/O]   [Remote I/O, digital]   [CAN adapter]